RRS-2 Technical Manual 22
© 2010 CBS ArcSafe
®
2012-04-18
5.0 Maintenance
5.1 Introduction
The
CBS ArcSafe®
RRS-2 is designed to require little maintenance; however, adopting a regular
maintenance program will keep the RRS-2 in good condition allowing years of trouble-free service.
5.2 Prior to Use
Before use examine the general condition of the unit.
1.
Inspect the switch and indicators for tightness and damage.
2.
Inspect the cables for wear or cracking, always replace a damaged cable.
3.
Check cable core grips for tightness.
4.
Check for loose fasteners.
5.
Ensure actuators are free of dirt and grime by wiping down with a dry
cloth.
6.
Run the unit unloaded to verify there is no abnormal noise or vibration. If
abnormal condition exists, do not use.
7.
If the unit has been inactive for more than 30 days, please measure the
voltage across each battery in order to ensure that they are both running at
12Vdc for a combined 24Vdc
5.3 After Use
After use, clean the RRS-2 ensuring the power supply vents are free of dust and debris. Ensure the unit is
free of oil or grease and if necessary, clean with a dry cloth. Store the device covered with either the
standard dust cover or the waterproof cover (optional), in a clean, dry location to prevent damage.
5.4 Every 12 to 18 Months
Every twelve to eighteen months, depending on use,
CBS ArcSafe®
recommends performing the following
preventative maintenance.
1.
Check that the batteries maintain a charge.
2.
Perform an electrical inspection of internal wiring, checking for signs of
heat and loose connections.
3.
Check all cables for extreme wear or cracks.
4.
Check that the pneumatic tires (optional) are properly pressurized to 24
PSI and sufficiently sealed.
Содержание RRS-2
Страница 32: ...RRS 2 Technical Manual 28 2010 CBS ArcSafe 2012 04 18 This page has been intentionally left blank...
Страница 34: ...RRS 2 Technical Manual 30 2010 CBS ArcSafe 2012 04 18 This page has been intentionally left blank...
Страница 38: ...RRS 2 Technical Manual 34 2009 CBS ArcSafe 2012 04 18 This page has been intentionally left blank...
Страница 42: ...RRS 2 Technical Manual 38 2009 CBS ArcSafe 2012 04 18 This page has been intentionally left blank...