RRS-2 Technical Manual 33
© 2009 CBS ArcSafe
®
2012-04-18
4.0 Camera Troubleshooting Guide
Symptom
Solution
Poor signal / static due to
electromagnetic interference
The wireless camera and receiver can switch to multiple wireless
channels; switching channels or ensuring a direct line of sight with
the camera may reduce the effects of interference (See System
Operation Section for information regarding changing channels).
Re-align wireless system antennas.
No video signal
Check to ensure the camera is connected to the racking unit.
Check to ensure the ‘CAMERA’ switch is ON.
Check to ensure that the camera and receiver are on the switched to
the same channel.
Check to ensure power is available to both the receiver and the
monitor. Ensure the receiver is connected to either the battery or
its AC power supply. Ensure the LCD display is charged or
connected to its AC power supply. Ensure the rechargeable power
supply has an adequate charge.
Ensure the A/V cable is connected to the output of the wireless
receiver and the input of the LCD display.
Содержание RRS-2
Страница 32: ...RRS 2 Technical Manual 28 2010 CBS ArcSafe 2012 04 18 This page has been intentionally left blank...
Страница 34: ...RRS 2 Technical Manual 30 2010 CBS ArcSafe 2012 04 18 This page has been intentionally left blank...
Страница 38: ...RRS 2 Technical Manual 34 2009 CBS ArcSafe 2012 04 18 This page has been intentionally left blank...
Страница 42: ...RRS 2 Technical Manual 38 2009 CBS ArcSafe 2012 04 18 This page has been intentionally left blank...