21
REMOTE CONTROL PANEL "MC180”
Wall
with “BMAD” spacer
[optional]
fixing
Built-in fixing
figure 3
1
2
3
4
5
LEGEND
OPERATION
1)
Blue service battery "1" operation status LED.
3)
Yellow “manual” mode LED.
2)
Blue service battery "2" operation status LED.
5)
BDS180 connector (the MC180 is supplied with a
6m cable)
4)
Select button.
Press and hold (for 3 seconds) the button, ref. 4, to switch
the operating mode of the BDS180 from "automatic" to
"manual" and vice versa.
If the yellow LED, ref.3, is on, it means that the “manual”
mode has been activated.
When the device is set to “manual” mode, press briefly
the button, ref. 4, to switch the selection between battery
“1" and battery “2".
EN
