4
Base
Cover
An accessory L-bracket (p/n MT-HS)
can be installed to turn the entire
Height Strip 90° in either direction
to orient the viewing windows parallel
to the wall. This provides a profile
shot of customers entering and
exiting a store.
The camera(s) can be adjusted up to 22°
left or right of center to adjust the view
slightly into or out of the store.
Viewing Window (x3)
Front-Mounted Cameras
Side-Mounted
Cameras
2 SERVICE
If the unit ever needs repair service, the customer should
contact CBC (America) Corp. for return authorization and
shipping instructions.
3
CARE AND MAINTENANCE
Clean the viewing window(s) as needed with a mild, non-
abrasive detergent in water and a soft cloth.
4 DESCRIPTION
The HS Series of Height Strip camera housings are intended
to improve in-store security in two ways. First, when
installed next to the main entrance of a store, cameras
within the store will capture a subject’s height when exiting
as he or she passes the brightly colored labels. Second, the
Height Strip’s on-board camera will provide a facial shot of
the subject as he or she exits. Each Height Strip unit can
support up to five (5) Color Hi-Resolution cameras. Up to
three (3) cameras can be oriented to look forward through
the curved viewing windows and can be adjusted left or right
of center. Up to an additional two (2) cameras can be turned
90° perpendicular to look directly across the doorway and
provide a profile shot of the subject. Any cameras looking
through the viewing windows can be adjusted 22° left and
right of center. Side-viewing cameras cannot be adjusted,
and require the installer to drill a small hole in the side of the
Height Strip.
Figure 1 Height Strip Camera
