Cayin SMP-WEB4, Руководство пользователя

Страница: 30 / 159

USER MANUAL
22
SMP-WEBDUO
1. Choose an output method from the drop-down menu as
well as display configurations such as display orientation
and resolution. Those information will be shown below
the drop-down menu according to your selection. Please
configure the settings accordingly. For detailed introduction
of each configuration, please refer to section
7-4 Display
Settings
.
2. Tick "
Hide Cursor
" checkbox if you don’t want to see the
cursor on the screen.
3. If you want to turn off the display (SMP will cut down the
VGA, DVI, or HDMI output) automatically, you can set a
specific time of a day or day of week to cut off the VGA/DVI/
HDMI signal at the bottom of this page.
4. Click [
Next
] to save all the settings.
* User Define Resolution (for advanced user)
If you do not find any suitable resolutions in the drop down
menu, you can customize your own resolution by our "
User
define
” feature.
1. Choose "
User define
" in drop down menu.
If you choose HDMI, DVI or
VGA output (not Auto), those
resolutions with * sign after
the number are supported
by display’s EDID (or DDC)
i n f o r m a t i o n . C h o o s i n g
those resolutions without *
sign is not suggested and
the system may not work
properly. If you can not see
any * after the resolution
number, please check you
display maker or your VGA/
DVI/HDMI cable for EDID
signal support.
Most screens will enter the
sleep mode when the VGA,
DVI or HDMI signal is cut
down by the SMP player.
However, some screens
might respond unexpectedly,
such as showing a blue
s c r e e n . T h e o u t c o m e
depends on the firmware of
each screen, not SMP player.