Installation
IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage
(V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and
frequency in your home.
The manufacturer declines all responsibility in the event of the installer failing to observe all the
accident prevention regulations in force, which are necessary for normal use and the regular
operation of the electric system.
Electrical connection
YOUR WINE COOLER IS INTENDED FOR FITTED AND PERMANENT INSTALLATION
.
We recommend that the appliance is connected by a qualified electrician, who is a member of the
N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.
o
Improper use of the grounded plug can result in the risk of electrical shock. If the power
cord is damaged, have it replaced by an authorized service center.
o
This wine cooler should be properly grounded for your safety. The power cord of this wine
cooler is equipped with a three-prong plug which mates with standard three prong wall
outlets to minimize the possibility of electrical shock.
o
Do not, under any circumstances, cut or remove the third ground prong from the power
cord supplied. This wine cooler requires a standard 220~240 Volt A.C. /50Hz electrical outlet
with three-prong ground.
o
This wine cooler is not designed to be used with an inverter.
o
The cord should be secured behind the wine cooler and not left exposed or dangling to
prevent accidental injury.
o
Never unplug the wine cooler by pulling the power cord. Always grip the plug firmly and
pull straight out from the receptacle.
o
Do not use an extension cord with this appliance. If the power cord is too short, have a
qualified electrician or service technician install an outlet near the appliance. Use of an
extension cord can negatively affect the performance of the unit.
o
If any problems with the wine cooler persist, please contact the Customer Service Dept.
Positioning
o
It is advisable that your appliance is only installed in a location where the ambient
temperature of the room, corresponds with the climate classification that is stated on the
rating plate of your appliance. Your appliance may not function correctly if the ambient
temperature falls outside of the following ranges.
Climate classification Appropriate ambient temperature
SN
+10 to +32 degrees centigrade
N
+16 to +32 degrees centigrade
ST
+18 to +38 degrees centigrade
T
+18 to +43 degrees centigrade
