Cattron CattronControl CCM12, Руководство пользователя

Страница: 12 / 25

CCM12 CANbus
User Manual
12
9M02-7717-A001-EN
Version 3.0
Table 4: RS485 Interface Characteristics
BUS SPEED TBD
STANDARD TBD
PROTECTION TBD
ISOLATION Each port is individually isolated for signals, and globally isolated for power supply
CONFIGURATION TBD
2.2.5 LED Indicators
The MCU has five bicolor LEDs.
Figure 9: MCU LEDs
Table 5: MCU LEDs Description
LED NAME COLOR MEANING
ON Orange The MCU is powered and properly initialized.
RF Green Valid RF Telegrams are received from peer OCU, and RF connection is
established. Both main relays are activated - MCU is in Active State.
Orange Valid RF Telegrams are received from peer OCU, but RF connection is not
established. Main relays are not activated - MCU is in Passive State.
Red
Indicates that valid RF Telegrams are received from another OCU (an OCU with
a different TransKey ID).
Red/Orange
Flashing MCU is scanning RF channels to find its peer OCU. Main relays are not
activated - MCU is in Passive State.
Off No RF Telegrams received. Main relays are not activated - MCU is in Passive
State.
SYSTEM Green Commands are being received (OCU actuators are being moved).
Red Blinking
Error indication; the number of blinks provides an error code. Refer to Appendix
A for description of error codes.
CAN1 Green, Red Master Processor CAN status. Behavior depends on CAN operation (CANopen
or J1939). Refer to the sections specific to CANopen and J1939.
CAN2 Green, Red Slave Processor CAN status. As for CAN1, refer to the sections specific to
CANopen or J1939 for more details.
*“Peer OCU” refers to an OCU using the peer TransKey (with the same 24-bit ID)