Cattron CANplus CP800 Скачать руководство пользователя

Страница: 32 / 45

CANplus

CP800

Control Panel Operation Manual

9M02-1000-A201-EN

Revision E

Configuration

The CP800 has been preloaded with factory default configurations, or optionally a custom OEM-specific

configuration, to ensure easy start-up and commissioning. To support the diversity of applications, the control

panel is easily configured on demand. Accessing configurable settings can be accomplished in three ways:

• Display Menu
• CANplus

Customizer Software Suite and CANplus

Config Kit

• CANplus

Customizer Software Suite and a USB drive

8.1 Display Menu

Most commonly accessible parameters can be changed onsite or in a facility by navigating the display using the

soft keys to find the appropriate menu page and data field. The available menu items are dependent upon the

current access level (see the

Menu Tree

section for available menu items). Easy to follow menu navigation

diagrams are located throughout the user manual and accompany each section which describes a configurable

operation or setting.

8.2 CANplus

Customizer Software Suite and CANplus

Config Kit

In situations where multiple units must be reconfigured, or in the case of a single unit which requires complete

reconfiguration, using the CANplus

Customizer Software Suite, which is proprietary configuration software, is

highly recommended. The software suite is meticulously maintained and regularly updated. These free updates

include software enhancements and new functionality, and they ensure compatibility with evolving technologies.

Please see the Resources section at

www.cattron.com/CP800

The CANplus

Config Kit (Part Number 010-6750-01) includes the following:

•  An adapter harness that connects to the panel’s engine interface connector
•  An AC power supply
•  A USB to CAN bus hardware adapter

With this kit, a panel’s configuration can be read from the panel or written to the panel via CAN bus. During read

or write operations, the panel must be the only CAN bus device. Using the included adapter harness ensures

proper operation during configuration read or writes.

Содержание CANplus CP800














































Результаты поиска

Содержание CANplus CP800

Отзывы:

Похожие инструкции для CANplus CP800

Бренды по названию

Популярные бренды

Cattron CANplus CP800, Руководство по эксплуатации

Результаты поиска

Содержание CANplus CP800

Отзывы:

Похожие инструкции для CANplus CP800

Бренды по названию

Популярные бренды