Cattini Oleopneumatica YAK 132/C, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 51

15
USE
- Expressly observe the safety rules already described in this manual.
1) Position the jack under the supports as described in the manual of the vehicle
the manufacturing company is not responsible for any break or damage to the lifted
vehicle or to persons or property due to an incorrect use of the jack.
2. The handle has two positions: a high position for transporting and a low one for positioning the
jack under the vehicle.
3. Press the right key on the distributor box for lifting.
DWG. 8
4. Press the left key on the distributor box for lowering.
- After lifting the load, it is absolutely essential to rest it on the support stands before doing any
work under it.
REMEMBER THAT THE JACK IS A LIFTING DEVICE
AND NOT A SUPPORTING DEVICE!!
- The operator’s employer will have to provide the necessary training and furnish the necessary
information about the pumping and shifting forces.
- Before working with the jack, it is advisable to perform a few operations with no load in
order to acquire the sensitivity necessary to work safely with the jack.
IMPROPER USE
The air-hydraulic jack has been designed and made to lift transport vehicles. Any other use of the
jack, such as for instance lifting and/or moving persons, is considered to be definitely improper.
All use of the jack not in conformity with the safety rules listed in this manual is considered to be
improper use.
WARRANTY
This jack is covered by a 12-month warranty starting from the date the warranty comes into effect
or from the date the jack leaves our factory if it has not already been rendered effective on-line; it
covers all manufacturing defects but not transport expenses, defects caused by improper use or
damages suffered during transport. For more details please see the card attached to this manual.
MAINTENANCE JOBS FOR THE END USER
- The jack requires no particular maintenance. However, do control the condition of the balloon
diaphragm periodically, making sure there are no cracks or cuts. If cracks or cuts are found
replace the balloon, contacting an authorised assistance centre.