Catler KM 8012, Инструкция по эксплуатации

Страница: 23 / 27

20
OPERATING YOUR STAND MIXER KM 8012
USING THE PASTA ATTACHMENT
1. Put the stand mixer on clean, fi rm and
stable surface within easy reach of
a mains socket.
2. Release the lock screw and remove the
front cover.
3. Insert on of the pasta attachments in the
hole on the tilt-back head (with the shaft
pointing forward).
4. Tighten the joining screw. Make sure that
the attachment is not loose and does not
move.
5. Now insert the power plug into a power
socket.
6. Press the button. A sound is made and
“0” speed and “00:00” time will be shown.
7. Turn the speed control dial to set the
required speed. We recommend that you
set the initial speed to 5 and adjust as
needed.
8. When all the raw materials have been
processed, set the speed to “0”, wait until
the rotating parts come to a complete
stop and press the
button briefl y to
turn the appliance off . Then, unplug the
power cord from the mains socket.
9. Hold the attachment with one hand
and release the locking screw with the
other. Carefully remove the attachment
from the tilt-back head and put it on the
countertop or in the sink. Insert the front
cover in the hole on the tilt-back head
and tighten the joining screw.
10. Clean the attachment and the stand
mixer according to the instructions in the
“Care and Cleaning” chapter.