Catler GR 7020, Инструкция по эксплуатации

Страница: 14 / 17

12
CARE AND CLEANING
CARE AND CLEANING
Before cleaning the appliance, always
disconnect the plug of the power cord from
the mains socket and let it to cool down
properly.
We recommend that you lift the top plate to
allow the grill to cool down faster.
WARNING!
DO NOT WASH THE
APPLIANCE, MAINS
CORD AND PLUG
UNDER RUNNING
WATER AND DO
NOT IMMERSE IT
IN WATER OR ANY
OTHER LIQUID.
ATTENTION:
Do not use sharp objects, chemicals,
thinners, petrol or other similar
substances. Never clean the plate
warmer with a steam appliance.
CLEANING THE OUTER SURFACE
Wipe the outer surface with a soft, lightly
moistened sponge. To remove the deposits,
you can also use considerate liquid
detergents or sprayed solutions for stainless
surfaces. Apply the cleaning agent on the
sponge, not on the appliance surface. Wipe
with a moistened sponge, then with a dry
cloth.
Before plugging the power cord in the mains
socket, make sure that all the surfaces are
dry.
CLEANING THE DRIP TRAY
Remove the tray and clear the contents after
each use. Wash the tray in warm water with
a little washing-up liquid using a soft sponge.
Rinse and dry thoroughly. After cleaning and
before plugging the power cord in the mains
socket, always make sure you have inserted
the tray in the grill body.
WARNING!
Take great care
when carrying the
tray with hot fat or
juice.
CLEANING GRILLING SURFACES
You can remove the grill plates from the grill
body for easy cleaning. However, always fi rst
make sure that both grill plates have cooled
down completely.
To remove the grill plates (bottom and top),
please use the EJECT buttons located in the
grill interior. Press the button to release the
plate which will be slightly tilted to allow
easy removal.
Wash the grill plates in warm water with
a little washing-up liquid using a soft
sponge. To remove the deposits, you can
use considerate cleaning agent. Apply the
cleaning agent on the sponge, not on the
plate surface. To remove tough deposits, use
a fi ne plastic spatula or a nylon wire brush.