Catler GR 7020, Инструкция по эксплуатации

Страница: 11 / 17

9
OPERATING YOUR CONTACT GRILL GR 7020
OPERATING YOUR CONTACT GRILL GR 7020
BEFORE FIRST USE
Before fi rst use, remove all packaging
and advertising labels / stickers from the
appliance.
Make sure that appliance, power cord and
the socket are not damaged.
Wipe grill plates, drip tray, probe, storage
drawer and the grill’s outer surface with
a soft sponge lightly moistened in warm
water. Wipe dry using a clean wiping cloth.
REMOVING AND ATTACHING THE GRILL
PLATES
To remove the grill plates (bottom and top),
please use the EJECT buttons located in the
grill interior. Press the button to release the
plate which will be slightly tilted to allow
easy removal.
NOTE
Before removing or attaching the grill
plates, always make sure that the grill
plates have cooled down completely
and the power cord is unplugged from
the mains socket.
To be able to put the plate in position and
secure in the grill body, position it at an angle
of about 45° with the grill so that tabs at the
back of the plate will engage in the grill body
slots. Lower the plate slowly, then gently
press the plate’s outer edges until you hear
a click.
NOTE
If any plate (top or bottom) is inserted
incorrectly in the grill body, an error
will be shown on the display. In such
case, remove the plate and press
EJECT to insert it again.
DRIP TRAY
The drip tray is embedded in the grill body
and thanks to the construction design, the
juice will drip directly into the tray.
The drip tray is secured in the grill body with
a click mechanism. To easily remove the drip
tray, press it gently inward and the tray will
eject from the grill body.
Insert the drip tray in the grill body and press
it gently until you hear a click.
NOTE
When handling the tray fi lled with hot
juice or fat, take great care to avoid
burning. Before grilling, make sure
that the drip tray is correctly inserted
and fi xed in the grill body.