Catler GR 7020, Инструкция по эксплуатации

Страница: 12 / 17

10
OPERATING YOUR CONTACT GRILL GR 7020
TURNING ON THE GRILL FOR THE FIRST
TIME
1. Put the grill on a fl at and fi rm surface
with easy reach of a power outlet. Make
sure that there is suffi
cient space around
the grill to allow proper air circulation.
WARNING!
No not place
the grill on or in
the vicinity of
flammable surfaces
or materials.
2. Lift the top plate to open the grill.
3. Plug the power cord in the mains socket,
press the power switch (located at the
back of the grill) and an acoustic signal
will be output. The control panel will
light up. Default cooking time „5:00“ and
temperature „200“ will be shown.
4. Press the grill On/Off button.
5. Leave the grill powered on for about
5 minutes. During this time, you may
notice slight smoke and an unpleasant
smell. This is a normal event which
disappears during use.
NOTE
Before switching on for the fi rst time,
you can apply a small amount of
quality vegetable oil on the grill plates
with a kitchen cloth. You can repeat
this process several times over the grill
lifetime. This will improve the grilling
result and prolong the grill plate
lifetime.
USING YOUR CONTACT GRILL
1. Put the grill on a fl at and fi rm surface
with easy reach of a power outlet. Make
sure that there is suffi
cient space around
the grill to allow proper air circulation.
WARNING!
No not place
the grill on or in
the vicinity of
flammable surfaces
or materials.
2. Lift the top plate to open the grill.
WARNING!
Never heat the grill
if it’s completely
closed. Otherwise
the grilling surfaces
and the heating
element might be
damaged.
3. Plug the power cord in the mains socket,
press the power switch (located at the
back of the grill) and an acoustic signal
will be output. The control panel will
light up. Default cooking time „5:00“ and
temperature „200“ will be shown.
4. Press the temperature setting buttons to
set the required temperature.