Cateye CC-TR100, Инструкция по эксплуатации

Страница: 17 / 28

CC-TR100
31 30
CC-TR100
Sound menu screen
MODE-
1
MODE-
2
Manual odometer input menu
screen
MODE-
1
MODE- 2
MODE-
1
MODE-
2
MODE-
1
MODE-
2
Tire circumference input menu
screen
MODE-
1
MODE-
2
MODE-
1
MODE- 2
Date menu screen
For the basic information on how to use the
menu screen, refer to page 28.
MODE-
1
MODE-
1
MODE-
1
MODE-
1
m. d'. y
d. m'. y
y'. m. d
MODE-
2
MODE-
2
MODE-
2
MODE-
2
S/S/E
S/S/E
MODE-
1
MODE-
1
MODE-
1
MODE-
2
24h
12h
MODE-
2
MODE-
2
S/S/E
S/S/E
Date
Select one of the following date display formats: Year, Month, Day (ymd); Day, Month, Year
(dmy); or Month, Day, Year (mdy).
Date cannot be changed while the bicycle is in motion.
NOTE: • Press and hold the MODE-2 button to speed up the progression of numbers.
• The figure below shows a “Year, Month, Day” display format. When changing the
display format, the order of date also changes.
Switch date display format
Set year Set month Set day
Date menu screen
Setting clock menu screen
Switch between the
24h /12h system Hour setting Minute setting
Select
Select
Setting clock
This function is used to set the clock, and to choose between 12- and 24-hour modes.
Clock setting cannot be changed while the bicycle is in motion.
NOTE: Press and hold the MODE-2 button to speed up the progression of numbers.
For the basic information on how to use the
menu screen, refer to page 28.
Sound
1. Alarm sound setup
An alarm will alert when the heart rate zone (or Cadence zone) target is turned on, and the
sound icon will illuminate.
NOTE: The HR and cadence zone alarms are described here:
• HR Zone: one beep
• Cadence Zone: two beeps
• HR and Cadence zones: three beeps
2. Button operation sound setup
Set button operation sound on/off.
In the initial setup, both the alarm sound and the button operation sound are set to ON.
MODE-
1
MODE- 1
On
OFF
MODE-
1
MODE-
2
On
OFF
MODE-
2
On
OFF
MODE-
2
S/S/E
S/S/E S/S/E S/S/E
Sound menu screen
S/S/E S/S/E
On
OFF
MODE-
1 or
MODE-
2
Auto-mode menu screen
Select Select Select
Alarm sound (Heart rate zone)
Alarm sound (Cadence zone) Button operation sound
Select
Auto-mode
Set auto-mode on/off.( For auto-mode information, see page 25)
The auto-mode function is initially set to ON.