CATCH
SOLAR RELAY
Installation
CATCH Power SOLAR RELAY
–
Installation Manual - Page 4
CATCH Solar Relay has been designed specifically for the solar industry, as such the
terminal layouts are designed for maximum flexibility and simplicity of wiring.
Highlights on the installation are:
•
DIN Mounted.
•
Same size as a 2
Pole miniature
circuit breaker
Duplicated power
terminals for easy
daisy chaining.
•
CATCH Solar Relay is the size of a 2 pole miniature circuit
break, it must be mounted inside an electrical enclosure
such as a switch board, sub board, load centre, or any
other enclosure designed to house electrical switch gear.
CATCH Solar relay is designed to be DIN mounted inside a
standard miniature circuit breaker cover.
•
CATCH Solar Relay is designed to control loads via an
external contactor. This means the number and type of
loads controllable by CATCH Solar Relay is only limited by
your imagination.
CATCH Solar Relay can control one or more contactor coils
(up to a maximum load current of 4A). CATCH Solar Relay
will happily drive one or more single or 3 phase contactors.
•
Power terminals are duplicated for easy daisy chaining to
other power control devices.
