CATCH Power SOLAR RELAY
–
Installation Manual - Page 13
INSTALLATION
–
Configuration
Once you have chosen the device, the Configurator App will connect. At this point
the Bluetooth light on the device will turn on and the Configurator App will show
you the Live Data View.
Understanding the Live Data
CATCH Solar Relay is monitoring all aspects of
the connected site. The data is visible on this
screen.
Device Time:
The current time as reported by
the device. This is updated automatically
when the configuration is changed.
Volts:
The RMS voltage as seen for the Relay.
Amps:
RMS current as measured by the CT.
Freq:
Grid Frequency
Power:
The power measured at the point the
CT is connected. A negative number
represents exporting power flow.
Run time:
The amount of minutes since
midnight the load has had a voltage applied.
Duty:
Status of the connected load. 1 means
the load has a voltage applied. 0 means no
voltage is applied (the load is off).
