6
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which
would have a detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed
based on the hardness of the water used. This is intended to optimise and
customise
the level of salt
consumption.
Please follow the steps below for adjustment in salt consumption.
5.
Open the door and switch on the
appliance.
6.
Press the Rapid button for more than 5 seconds, when the salt
in
dicator
flashes means entering the water softener
settings.
set model within 60 seconds after the appliance was switched on.
7.
Press the Rapid button to select the proper set according to your
local
environment, the sets will change in the following
sequence:
H1
-
>H2
-
>H3
-
>H4
-
>H5
-
>H6.
8.
Without operation in 5 seconds or press the Power button to complete the setup
and exit the setup
mode.
WATER HARDNESS
Water softener level
Salt consumption
(gram/cycle)
German
dH
French
fH
British
Clarke
Mmol/l
0
-
5
0
-
9
0
-
6
0
-
0.94
H1
-> Rapid Light bright
0
6
- 11
10
-
20
7
- 14
1.0
-
2.0
H2
-
> 90 min Light bright
9
12 -
17
21 -
30
15
- 21
2.1 -
3.0
H3
-
> 90 min, Rapid Light bright
12
18 - 22
31
-
40
22 - 28
3.1
-
4.0
H4
-
> ECO Light bright
20
23
-
34
41 -
60
29
- 42
4.1 -
6.0
H5
-
> ECO, Rapid Light bright
30
35
-
55
61
-
98
43
-
69
6.1
-
9.8
H6
-
> ECO, 90 min Light bright
60
1
°
dH=1.25
°
Clarke=1.78
°
fH=0.178mmol/l
The manufactory setting: H4
Contact your local water board for information on the hardness of your water
supply.
Water Softener
