15
6.
Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper
one.
7.
Pour in the
detergent.
8.
Insert the plug into the socket. The power supply refer to last page ”Product
fiche”. Make
sure
that the water
supply
is
turned
on to
full
pressure.
9.
Open
the
door,
Press the power
button,
and the
On/Off
light will
turn
on.
10.
Choose a program, the response light will turn on. Then close the door,
the
dishwasher will start its
cycle.
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser
must be refilled. To reset the dishwasher, follow the
instructions
below:
4.
Open the door a little to stop the dishwasher, after the spray arm stop working,
you can open the door
completely.
5.
Press any Program button more than three seconds the machine
will be in
stand by state
.
6.
You
can
change
the program to the desired
cycle
setting.
3 sec
Starting A Cycle Wash
Changing The Program Mid-
cycle
