24
Please refer to the specified installation steps in the installation
drawings.
Step 4. Dishwasher installation steps
10.
Affix the condensation strip under the work surface of cabinet. Please ensure
the
condensation
strip is
flush
with edge
of
work
surface.
(Step
2)
11.
Connect the inlet hose to the cold water
supply.
12.
Connect the drain
hose.
13.
Connect the power
cord.
14.
Place the dishwasher into position. (Step
4)
15.
Level the dish
washer. The rear foot can be adjusted from the front of the
dishwasher by turning the
Philips screw
in the middle of the base of dishwasher
use an
Philips screw
. To adjust the front feet, use a flat screw driver and turn
the
front
feet
until
the dishwasher is level.
(Step
5
to Step
6)
16.
Install
the
furniture
door to the
outer
door
of
the dishwasher.
(Step
7
to Step
10)
17.
Adjust the tension of the door springs by using an Allen key turning in a clockwise
motion to tighten the left and right door springs. Failure
to do this could cause
damage to your dishwasher. (Step
11)
18.
The
dishwasher
must
be
secured
in
place.
There
are two ways to do
this:
A.
Normal work surface: Put the installation hook into the slot of the side plane
and
secure it to the work surface with the w
ood
screws.
B.
Marble or granite work
top:
Fix
the side with
Screw.
