Castelle FAXPRESS PREMIER, Руководство администратора

Страница: 119 / 639

Admin Guide > Configuring the FaxPress Premier
FaxPress Premier Administrator Guide 103
zero will allow the FaxPress Premier to send faxes with only one line connected and con-
figured.
Modifying the Number of Idle Lines
Keeping the minimum number of idle lines set to one enables the system to dynamically
mix send and receive jobs while still dedicating a line for incoming calls, which is ideal in
most faxing environments. In some cases, however, you may decide to modify the mini-
mum number of idle lines.
Consider modifying the minimum number of idle lines from one to zero to use all of the
FaxPress Premier’s lines for sending, or to dedicate more than one line for incoming fax
jobs.
To modify the minimum number of idle lines, follow these steps:
1. Run regedit.
2. Right-click in the right hand window and select New. Unless the minimum idle
lines entry has already been created, there will be no Min Idle Lines entry in the
registry.
3. Select DWORD Value.
4. In the DWORD Value dialog box, change the new DWORD value to Min Idle Lines.
5. Once created, double-click on the Min Idle Lines key and enter 0 (or a higher
value) in the dialog box. Zero is the necessary value for sending with one line or
for setting up a send-only environment.
6. Restart the Castelle Intel Fax Services (FPIFSrvc) service. (Start>Set-
tings>Control Panel>Administrative Tools>Services)
Required FaxPress Premier Configuration
Before beginning the basic configuration, first make sure:
„
the FaxPress Premier is properly connected to your network and phone system, and
is powered on.
„
either the FaxPress Plus Client for Administrators or the FaxPress Plus Client for
Users is installed on a network workstation, preferably on the same segment as the
Premier.
After you’re finished with the basic configuration steps described here, be sure to send and
receive a test fax using the Administrator account (see Sending a Test Fax on page 116
)
to confirm the settings are correct before going on to configuring your Premier for DID and
PBX integration (see Automatic Routing and PBX Integration on page 89), or to creating
and configuring new Premier users. (See .)
Note: If your FaxPress Premier is operating in a Novell environment, see User
Authentication (Novell Only) on page 150.