11
10. S-VIDEO Connector
- Connection to S-Video jack.
11. RMC Connector
- Connection to remote controller IR Receiver.
12. MOUSE Port
- Connection to PS2 Mouse.
13. PTZ Connector(RS485)
- Connection to PTZ camera.
14. LAN Port
- 10/100 Base-T RJ45 ethernet port for network connection.
15. SW(DIP Switch)
- Adjust the Dip Switch setting according to required functions. The system must be restarted after
adjustments.
Functions
OFF Position(Up)
ON Position(Down)
Monitor Output
VGA/PAL Composite 60Hz
VGA/PAL Composite 50Hz
CD Boot
Off
CD Boot
Test Off
Factory
Test
Mode
Color System
NTSC
PAL
* When using Composite or S-Video output, the DVR will auto detect the output when the DVR is
Turned on.
* When changing the Monitor Output from Composite to S-Video or vice versa while the DVR is in
operation, press the Monitor button on the front panel once
* If both Composite and S-Video output is connected, priority will be given to S-Video.
16. RS-232 Port
- Serial port for Keyboard Controller and POS interface.
17. 75 Ohm Termination SW
- Termination Switch should be switched to the OFF(downwards) position when using Video Loop.
Introduction
PIN No.
Explanation
PIN No.
Explanation
2 RX 5 GND
3 TX
1,4,6,7,8,9
Not
used
5
4
3
2
1
9
8
7
6