USER MANUAL
CS969
33
The Cassese removable stop is a positive stop, easy to retract, by a simple action on retractable stop switch
9
on control panel
(page 28).
The special design of the removable stop makes all mouldings to be placed in the best way against the measuring system of the
machine.
It remains stable and without clearance in both position: engaged or retracted.
7.G.b Second cut
Right cut
-
The moulding is in contact with the moulding guide and held with the right hand.
-
Keep the left button
4
(CP Page 28) pressed down to immobilise the moulding.
-
Press the right button
6
(CP Page 28) to obtain a right saw cut.
Double cut
-
Keep the right button
6
(CP Page 28) pressed down to immobilise the moulding.
-
Then press the left button
4
(CP Page 28) to obtain the first cut, on the right, followed by the left cut.
7.G.c Cut on the end of a moulding (right cut)
Clamping and cutting are visible to the operator through the window.
He must therefore check that the horizontal clamp is correctly engaged in the moulding rebate and does not create pressure on the
end of the moulding (see Fig. 8). If there is pressure on the end of the moulding, the operator must only clamp and cut the right-
hand side using button
1
), and then, keeping this button held down, press button
6
.
This method using buttons
1
and
6
) is recommended for all moulding ends.
Figure 7-12
Figure 7-13
Figure 7-14
Figure 7-15
Содержание CS969
