9
3.2 Delivery scope and transport inspection
As a rule, the WineSafe is delivered with the following components:
WineSafe 24 / WineSafe 38 / WineSafe 66 with WiFi equipment
7 wooden shelves (10720 / 10725)
6 wooden shelves (10719)
Operating Instructions with handle and screws
Instruction for App-Control
Please note
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete shipment
or damages as a result of inadequate packaging or due to transportation.
3.3 Unpacking
To unpack the device, proceed as follows:
Remove the device out of the carton and remove the packaging material.
Your wine refrigerator should only be moved in an upright position.
Clean the interior surface with lukewarm water using a soft cloth.
After at least 12 hours, plugging the appliance into the wall outlet, than place wine bottles or
beverages in the appliance.
Please note
► Only remove the blue protective film shortly before setting up the device in the location where
it will be used, to prevent scratches and dirt accumulations.
3.4 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled. Returning the packaging back to
the material loop saves raw materials and reduces the quantities of accumulated waste. Take
any packaging materials that are no longer required to “Green Dot” recycling collection points for
disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee period
of the device, in order that the device can be re-packaged properly in the event of a
guarantee claim.
3.5 Setup
3.5.1
Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location must fulfil
the following prerequisites:
