11
3.5.4
Wine shelves
Usual shelf
Lower shelf
3.5.5
To remove a shelf
Remove all bottles from the shelves. Lift the shelf upwards and the gently pull it out, (eventually
untighten the screws).
Please note
► Ensure that the tabs are firmly engaged in place before storing any bottles.
► Any of the wine shelves can be removed to accommodate larger bottles.
► Spread your bottles out as evenly as possible over the shelves, so weight is not concentrated
in one point; and make sure your bottles will not touch the back of the cabinet.
3.6 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions
must be observed for the electrical connection:
Before connecting the device, compare the connection data (voltage and frequency) on the
rating plate with those of your electrical network. This data must agree in order that no
damages occur in the device. If in doubt, ask your qualified electrician.
The electrical outlet must be protected by a 16A safety cut-out switch.
The use of multiple plugs or gangs is prohibited because of the danger of fire that is involved
with this.
Make sure that the power cable is undamaged and has not been installed under or over hot or
sharp surfaces.
This unit is not designed to be installed in an RV or used with an inverter.
The electrical safety of the device is only guaranteed if the device is connected to a properly
installed protective conductor system. Operations using an electrical outlet without a
protective conductor are prohibited. If in doubt, have the house installation checked over by a
qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a missing or
damaged protective conductor.
