PART 3
Data Management Functions
E
56
3. Press
‘
or
“
to start the search. An index display of all data items in the
mode whose initial characters match those that you specified appears on the
display.
•
To clear the “
SEARCH
” indicator from the display (and cancel the current
search operation), press
ESC
. The search operation is also canceled when
you change modes, or by any data edit or input operation.
•
If no data item matches your specification, or there is no data stored in
memory, the message “
NOT FOUND!
’’ appears on the display.
4. Scroll through the index display item-by-item using
K
and
L
. You can
also scroll to the next page of items by pressing
“
or
‘
.
5. When the entry of the data item you are looking for is in the top line
(second line in the Schedule Keeper Mode) of the display, press
ENTER
to
switch to the full data display.
To locate data using mode search
Use the same procedures as described under “To locate data using initial
character search”, but press
SHIFT
and then
‘
or
“
to start the search.