– 81 –
10-4. To Assemble the CMOS Imager (Models M55E/M55E2/M55U/M56E/M56E2/M56U)
1. Align the protrusion of the holder and the hole of the CMOS Imager, and then fix them with two screws.
2. Insert the FPC into the connector of the CMOS Imager.
Let the FPC go the outer side of the boss as shown in the
right.
3. Turn the holder with the CMOS Imager around,
and hook it on the protrusion of the Lower Case.
Fix the holder with two screws.
4. Close the cover, and then fix it with four screws.
The protrusion of the holder should go into
the hole of the Imager.
Screw (Ø 2.3 x 4 mm)
Insert the FPC deep into the connector
of the 2D module.
The FPC should go the outer side of
the boss.
Hook it on the protrusion of the Lower
Case, and then insert it into the boss.
Screw
Screw
Содержание IT-3100
