Casio IT-3100, Руководство по обслуживанию

Страница: 16 / 102

– 14 –
4. TROUBLESHOOTING
4-1. Does not turn ON
4-2. Memory error occurs after booting IT-3100.
4-3. The diagnostic program cannot be loaded.
4-4. SDRAM NG
4-5. NAND-FROM NG
Memory error may occur when IT-3100 with an empty backup battery is booted.
In this case, initialize the memory as indicated on the display.
Refer to "4-12. PCMCIA NG".
Replace the MAIN PCB and check again.
Replace the MAIN PCB and check again.
Check the voltage and
placement of the battery.
Check if LCD
connector and BL connector
are correctly inserted.
Check on the
detection SW.
MAIN PCB is
defective.
LCD connector and
BL connector are
not correctly
inserted.
Battery is defective or
incorrectly inserted.
Detection SW is
defective.
Replace the
MAIN PCB and
check again.
Replace the
Detection SW and
check again.
Continue check.
OK
OK
NG NG
OK
NG