Casio DT-X400 Series Скачать руководство пользователя страница 57

Страница: 57 / 61

E-55

Charging Status LED

Oﬀ :

The battery pack is not installed.

Red:

Charging

Green:

Charging complete

Red/green alternate ﬂ ashing: Standby because the battery pack is faulty,

is installed incorrectly or is outside the
charging temperature range
(Charging begins when temperature returns
to the charging temperature range)

AC Adaptor Jack

Connect the AC adaptor (sold separately) here.

Dual Battery Charger
Connection Port

Used to connect Dual Battery Chargers to each other.

Connection Bracket
Attachment Holes

The connection bracket attaches here when you connect Dual Battery
Chargers to each other.

Battery Pack Contacts

Used to charge the battery pack.

Precautions for Use

• Water or moisture on the power contacts can cause a short-circuit and/or ﬁ re. Soil on

the power contacts will deteriorate the conduction causing poor charge performance.

When cleaning the power contacts, unplug the AC adaptor from the charger as safety

precaution and wipe oﬀ soil on the power contacts with a dry and soft cloth or with

cotton swab.

• The battery packs may become warm during charging. This is normal and does not

indicate a fault.

• Do not cover or place objects on top of the battery charger during charging.

• Do not remove batteries or disconnect the AC adapter during charging.

• Repeatedly installing and removing rechargeable batteries can cause them to

deteriorate.

• One connection attachment is provided for each dual battery charger. When multiple

dual battery chargers are connected, one connection attachment will be spare. The

spare connection attachment can be used as a backup.

Charging Battery Pack

Use the separately sold AC adaptor (AD-S12500A) for the power supply of the Dual Battery

Charger.

AD-S12500A

1.  Plug the cord from the AC adaptor into the AC adaptor jack of the Dual Battery Charger.
2.  Plug the AC cord into a wall outlet.
3.  Taking care that the battery pack is oriented correctly, insert it into the Dual Battery

Charger.

This causes the Charge Indicator LED to light in red, indicating that charging has started.

Содержание DT-X400 Series






























































Результаты поиска

Содержание DT-X400 Series

Отзывы:

Бренды по названию

Популярные бренды

Casio DT-X400 Series, Руководство пользователя

Результаты поиска

Содержание DT-X400 Series

Отзывы:

Бренды по названию

Популярные бренды