manualshive.com logo in svg

Casio DT-X400 Series, Руководство пользователя

Поделиться
Скачать
Casio DT-X400 Series Скачать руководство пользователя страница 10

E-8

Backup of All Important Data

 Caution

• Note that CASIO Computer Co., Ltd. shall not be held liable to you or any third party for any 

damages or loss caused by deletion or corruption of data due to use of the terminal, 
malfunction or repair of the terminal or its peripherals, or due to the batteries going dead.

• The terminal employs electronic memory to store data, which means that memory contents 

can be corrupted or deleted if power is interrupted due to the batteries going dead or 
incorrect battery replacement procedures. Data cannot be recovered once it is lost or 
corrupted. Be sure to make backup of all important data.

Use Casio genuine battery pack only

 Danger

• We recommend the use of Casio genuine battery packs with Casio devices. Casio genuine 

battery packs are tested for quality and safety for the safe use of the product they are installed.
We cannot be held liable for accidents or damages caused by counterfeit Casio battery 
packs or battery packs other than Casio genuine battery packs. When buying a battery pack, 
pay due attention to buy a Casio genuine battery pack.

Regulatory Information

Europe

Manufacturer:

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Importer

Casio Europe GmbH

Casio-Platz 1, 22848 Norderstedt, Germany
www.casio-europe.com

DT-X400
Options of DT-X400

• Please keep all information for future reference.

• The full text of the EU declaration of conformity is available at the following internet address: 

https://doc.casio.com/

• Products are for distribution within all member states of the EU.
Options of DT-X400 are HA-S60IO, HA-S62IO, HA-S36DCHG, HA-S32DCHG, HA-S20BAT, 

HA-S90PS10, HA-S95HB, AD-S50400A, AD-S12500A, HA-S81USBC.

For Europe models are DT-X400-10, DT-X400-20, DT-X400-C21, DT-X400-WC21.

Maximum radio output power

• IEEE802.11a/b/g/n: 2.4GHz <= 20dBm, 5GHz <= 16dBm

• Bluetooth: 2.4GHz <= 10dBm

• GSM: 900MHz <= 33dBm, 1800MHz <= 30dBm

• WCDMA: 850/900MHz <= 24dBm, 1900MHz <= 24dBm

• LTE: 850/900MHz <= 23dBm, 1800/1900MHz <= 23dBm, 2500MHz <= 23dBm

• NFC: 13.553MHz to 13.567MHz band -4.9dBμA/m at 10m.
Hereby, “CASIO COMPUTER CO., LTD.” declares that the radio equipment type “DT-X400” is 

in compliance with Directive 2014/53/EU.

Содержание DT-X400 Series






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды