manualshive.com logo in svg

Casio DT-X400 Series, Руководство пользователя

Поделиться
Скачать
Casio DT-X400 Series Скачать руководство пользователя страница 34

E-32

Using a microSD Card

DT-X400 supports micro SD cards.

The microSD card slot is located in the battery pack compartment, so you must remove the 

battery pack before installing or removing a microSD card.

Installation

1. Turn the terminal off  (shutdown).
2. Remove the battery pack.

(Steps 5 and 6 in the battery pack replacement 

procedure on page E-19)

3. Push the microSD card into the card slot until 

it is fully inserted, as shown in the fi gure.

4. Install the battery pack.

(Steps 2 and 3 in the battery pack replacement 

procedure on page E-18)

Precautions for Use

• The front and back of the card are diff erent, so the card must be oriented correctly 

when inserted into the slot. Inserting the card incorrectly could damage the card 

and/or the slot. Take care when inserting cards.

• When turning off  the smart handheld terminal, be sure to select “Shutdown” and not 

“Hot Swap”.

Removal

1.  Turn the terminal off  (shutdown).
2.  Remove the battery pack.

(Steps 5 and 6 in the battery pack replacement 

procedure on page E-19)

3.  Pull the microSD card out of the card slot, as 

shown in the fi gure.

4.  Install the battery pack.

(Steps 2 and 3 in the battery pack replacement 

procedure on page E-18)

Содержание DT-X400 Series






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды