51
2
Turning On Power
Slide and hold the power switch (
), and then release it when the
PW-LED lights up.
Turning on FIVA power after you set up Windows Me starts up Windows
Me.
First, perform the log-on operation to make the unit recognize the user.
If you use the unit alone and also not connected to a network, you can
set the unit so that the screen above does not appear.
Important
Do not turn on and off in a short time.
When turning on the power again after turning it off, wait about 10
seconds after turning off the power.
When you want to adjust the LCD brightness, perform the following
procedure.
q
Adjusting the LCD brightness with the keyboard (
see page 29
).
To increase the LCD brightness, press
Fn
+
F1
(
).
To decrease the LCD brightness, press
Fn
+
F2
(
).
w
Adjusting the LCD brightness with the Mobile Cockpit (
see page
92
).
Click the LCD brightness button (
) from the Mobile Cockpit.
The LCD brightness can be adjusted up to 8 grades.
