50
Using the Sleep function
FIVE has the Sleep function to save power as a standard function.
This means the Hibernation Mode or Standby Mode described before.
When this unit is not used temporarily, set the unit to the Sleep Mode so
that the available time of battery pack can be prolonged. (The time to
maintain the Sleep Mode differs according to the battery charge capacity
of battery pack.)
If this unit is enters the Sleep Mode while only the battery pack supplies
power, the PW-LED
indicator lamp will flash orange.
When the unit is recovered from the Sleep Mode, the screen that was
displayed before entering the Sleep Mode is restored.
To enter the Sleep Mode, perform
the following procedure.
Close the display panel (
see page
49
).
Select the Standby Mode from the
Start menu (
see page 47
).
Slide the power switch to enter the
Hibernation Mode (
see page 48
).
Press
Fn
+
F3
to enter the
Standby Mode (
see page 29
).
Press
Fn
+
F4
to enter the
Hibernation Mode (
see page 29
).
Click (
) from the mobile cockpit
(
see page 96
).
Click (
) from the mobile cockpit
(
see page 96
).
To recover from the
Sleep Mode, perform the
following procedure.
Open the display panel.
Slide the power switch.
Slide the power switch.
Slide the power switch.
Slide the power switch.
Slide the power switch.
Slide the power switch.
