Hand Alignment
Adjustment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Getting Ready
Enter the Timekeeping Mode.
l
Adjusting Hand Alignment
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least five seconds.
Release the button when [00] starts to
flash.
This enables adjustment of second hand
alignment.
After five seconds
After two seconds
Second hand
3.
If the second hand is not at 12 o’clock, use
(B) and (E) to align it.
4.
Press (D).
This enables adjustment of mode hand
alignment.
Mode hand
5.
If the mode hand is not at 12 o’clock, use
(B) and (E) to align it.
6.
Press (D).
This enables adjustment of the hour and
minute hands.
Minute hand
Hour hand
7.
If the hour hand and minute hand are not
at 12 o’clock, use (B) and (E) to align them.
8.
Press (A) to exit the setting screen.
Other Settings
Getting Ready
Enter the Timekeeping Mode.
l
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
2.
Press (D) 11 times.
This causes [KEY♪] or [MUTE] to flash on
the display.
3.
Use (E) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
4.
Press (A) to exit the setting screen.
Note
●
Note that alarm and timer tones will still
sound even while the operation tone is
muted.
Configuring Power Saving
Function Settings
1.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
2.
Press (D) 15 times.
This displays [P.SAVE].
3.
Press (E) to toggle the setting between
enabled (on) and disabled (off).
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
4.
Press (A) to exit the setting screen.
Note
●
For details about Power Saving, refer
to the information below.
l
Operation Guide 5537
18