CASE CONSTRUCTION CX37C, Руководство оператора

Страница: 114 / 228

4 - OPERATING INSTRUCTIONS
WARNING
Avoid injury!
Inspect the work area or job site to make sure
that machine operation can be done safely.
Confirm that the lever operation is the same
as indicated on the control pattern labels. If
not, immediately change the machine control
pattern or the label displayed to match the ma-
chine control pattern.
Failure to comply could result in death or se-
rious injury.
W1339A
The machine control pattern can easily be changed to
the “ISO” type
(I) or the “SAE” type (A) by changing the
position of the lever-pattern (1) located on the pattern
change valve (V) .
To change the pattern, perform the following operations.
1. Loosen the bolt (2) .
2. Rotate the lever (1) from the “ISO” type pattern (I) to
the “SAE” type pattern (A) or vice versa.
3. Tighten the bolt (2) in order to secure the lever (1) .
SMIL16MEX0456BB
4
Pattern: ISO type
Left–hand control lever control function
1. Arm out
2. Arm in
3. Swing left-hand
4. Swing right-hand
SMIL16MEX3075AB
5
Right–hand control lever control function
5. Boom lowering
6. Boom raising
7. Bucket in
8. Bucket out
SMIL16MEX3076AB
6
4-14