Cascade UTF2-08-1004-1885315, Руководство по эксплуатации и обслуживанию

Страница: 24 / 34

M
24
6 MAINTENANCE
6.1 Precautions
6.2 Unauthorised
alterations
6.3 Cleaning
6.4 Check on rod and
tubing
ATTENTION : careful maintenance is essential for good device
functioning.
Failure to perform maintenance as and when foreseen may
cause danger to people and objects.
It is the user’s responsibility to choose the device and ropes,
bands or chains deemed most suitable, with regards to both
functionality and capacity, for UTB handling and lifting.
We recommend that all manoeuvring and lifting operations be
performed with the utmost caution, in order to avoid collisions
that may jeopardise good functioning or cause damage to
components or personnel. .
It is strictly forbidden:

To use the positioner without any one of the components of which
it is composed.
 To weld, install or add any optional accessory not foreseen by
Cascade Italia.

To remove material..
ATTENTION: any alteration or modification made to the UTB
that has not been authorised by Cascade Italia in writing, will
cause the invalidation of the EC mark and product guarantee.
Do not wash the UTB using jets of water at high pressure.
After each wash, all the parts must be greased once more.
Every day, check that the rod and the surface are free from damage,
marks or any other fault that could jeopardise correct cylinder functioning.
Check the condition of the tubing and joints according to the hydraulic
system’s technical data and features. CASCADE ITALIA recommends
using Manuli tubing.
6.5 Routine maintenance
Hours Description
100
-
Check that the camping screws on the upper and lower brackets are tightened properly.
-
Check any damage to the hydraulic system’s tubes or joints.
-
Check arm synchronism in opening and closure.
500
In addition to the abovementioned checks:
-
Grease arm sliders as indicated in the following paragraph.
-
Check the arm’s gripping surface for wear
-
Check that the arm opening and closing cylinders are tightened correctly.
1000
In addition to the abovementioned checks:
-
check that the clamping screws of the sliding rails are tightened properly.
2000
In addition to the abovementioned checks:
-
replace the upper and lower sliders.
i