Cascade 503108, Инструкция по эксплуатации

Страница: 7 / 24

Make sure the bolts are fully
tightened with the allen key.
!
Take Care to ensure the wires are connected
as tightly as possible, Slide the rest of the
connect wires into the right upright post
before the Bottom Handle attachment.
!
FIXINGS: FIXINGS:
x
4
Part
No.
67
FIXINGS: TOOLS:
7
2. Attach the Front Handlebar Weldment
Ask someone to help you hold the • Front Handlebar Weldment (4) in front of the
Upright Posts (2 / 3) closely.
Connect the • Middle Section Wires (2 pins & 3 pins) (58.1 /58.2) and
Top Section Wires (2 pins & 3 pins) (56.1 / 56.2) together accordingly and then
insert these two wires into the hole of Right Upright Post (2) carefully.
Attach the •
Front Handlebar Weldment (4)
to the
Upright Posts (2/ 3)
carefully
with four
M8 x 20mm Allen Head Bolts (67)
with finger tight in position firstly
and then secure with the 6mm Allen key - provided.
3. Attach the Console
FIXINGS: FIXINGS:
x
4
Part
No.
83C
FIXINGS: TOOLS:
Remove the four •
M5 x 10mm Fixing Screws (83C)
which are located in the
back of the
Console (55)
.
Slide the 1. Console Cables (2pins & 3 pins) through the open hole of
the Console Bracket carefully as shown.
Attach the 2.
Console (55)
to the Console Bracket
assembled on the
Front Handlebar Weldment (4)
with four
M5 x 10mm Fixing Screws (83C)
and secure with the Cross Screwdriver.
Connect the 3.
Console Cables (2 pins & 3 pins)
and
Top Section Wires
(2 pins & 3 pins) (56.1 / 56.2)
together accordingly and tightly.
Take care 4. to ensure the wires are connected as tightly as posssible.
Slide the rest of the connect wires into the console post carefully
after the console attachment.
Make sure the screws are fully
tightened with the screw driver.
!
55.1
56.1
55.2
56.2
1.
2.
3.
4.
Tighten all of the •
M8 x 20mm Allen
Head Bolts (67)
on the
Right / Left
Upright Posts (2 / 3)
to
Main Frame
(1)
with the 6mm Allen key.
cascadehealthandfitness.com