Cascade 402013, Инструкция по эксплуатации

Страница: 20 / 28

How to Take Care of Your Air Bike
Never remove the protective casing.
!
We do not recommend you attempt to service the internal parts of the pedal assembly.
If they are found to be worn internally, we recommend replacing the pedal.
!
Storage
Keep the equipment in a dry place with as little temperature variation as possible. Try to protect from dust and always unplug
when not in use (if applicable).
The safety level given by the design of this air bike can only be maintained when this air bike is regularly examined for damage
and wear. Inoperable components should be replaced immediately or this air bike should be put out of use until it is repaired
Your air bike is designed for indoor exercising used only and should not be used or stored in damp areas.
Ensure you regularly check components for wear and make sure all the nuts & bolts are tightened before each exercise session
Maintenance Tips
•
Always use a soft, cotton cloth and dilute non-abrasive cleaner or a mid detergent for cleaning the exterior of this bike.
•
Never use ammonia, acid-based, or petroleum-based solvents on any portion of the bike as it may damage the finish.
Preventative maintenance Schedule
Daily –
•
Before each use, make certain that the area around the bike is free of obstacles that may interfere with the dual action
handlebar & pedal rotation.
•
Before each use, check that pedals & shaft screws are securely tightened and inspect both pedals & pedal straps for wear.
•
After each use, wipe down the surface of the air bike to remove sweat and moisture.
•
Wipe the face of the display console with a slightly damp, soft, cotton cloth. Avoid getting extra moisture on the display
console. Keeping the display console free of fingerprints and sweat will extend the life of the console.
Weekly –
•
Thoroughly clean the plastic housing of the bike.
•
Clean the top of the pedal straps, saddle & seat post, and the display console.
•
Check that pedals are securely tightened and inspect both pedals and pedal straps for wear.
•
Inspect all assembly bolts & nuts for wear and ensure that they are sufficiently tight.
Monthly –
•
Make sure all of the open ends of metal parts are wiped with thin grease to protect from rust.
•
Check the ribbed belt is correct tension: replace cracked, frayed, or otherwise non-uniform belt.
If necessary, call your local authorized distributor for Customer Service replacement.
•
Inspect for side-to-side play in axle assembly , and a grinding feeling in crank area when pedaling.
If necessary, call your local authorized distributor for Customer Service replacement.
•
Check and Replace the Console AA Battery if needed.
•
Clean for dust on Fan Wheel Assembly by spray gun if available.
Use of lubricants or cleaning solutions other than those so specified will result in diminished
performance and a shorter life span for that part.
!
20 cascadehealthandfitness.com