3
8305557-R2
FK0540.eps
WARNINGS & SAFETY MEASURES
Carefully read the instructions and guidelines in this manual.
Follow the steps shown to install the weigh system onto the
truck. If any instructions are not clear, contact Cascade.
WARNING
: Cascade is not responsible
for any physical harm done to the
operator due to the presence of the
indicator in the truck cabin.
No Stand Zone
No riders
No reaching through mast
No standing under load
CAUTION:
Do not use
the indicator in a
moist environment for
an extensive period.
IMPORTANT:
Field alterations may impair performance
or capability and could result in loss of warranty. Consult
Cascade for any required modifications.
Indicator rated to IP 65.
WARNING
: Operators (Drivers) must read
and understand this manual before being
allowed to operate this equipment. If the
operator does not understand any part of the
User Manual a supervisor should be asked
for an explanation. If it is still not understood,
this equipment should not be used.
WARNING
: The C-Series Weigh Forks are to be
operated by a qualified operator only. Overloading, load
positioning, load stability, load security and unqualified
operators can result in a hazardous situation.
WARNING
: The C-Series Weigh Fork can present a
hazard when serviced. This equipment must be serviced
by qualified personnel only.
WARNING
: Residual risk exists to pedestrians,
bystanders and service technicians in the work area.
Operate lift trucks and accessory equipment in a safe
working area and in compliance with facility, local and
national standards and rules.
WARNING
: Before operating, perform the Daily
Inspection as described in this manual
