20
8305557-R2
ADVANCED WEIGHING OPERATIONS
FK0564.eps
12
Remove the load.
13
Press and hold the "ON/PRINT" button for approximately
three seconds to view the total weight and number of
loads weighed.
14
The counter (number of loads weighed)
and total weight will flash for three
seconds.
15
While the indicator screen flashes, the
following can be performed:
• Press the "ON/PRINT" button to print
the total and reset the total weight to
zero and the counter to zero.
• Press and hold the "ON/PRINT" button
for approximately five seconds to
set the total weight to zero and the
counter to zero. The total will not
print.
NOTE:
If no button is pressed while the
indicator screen flashes, the total weight
and counter value stays in the indicator's
memory. The system will return to
normal weighing mode after 60 seconds.
13
14
15
Counter
Total
Press to print total and reset the total
weight and counter to zero
Press and hold for five seconds to reset
the total weight and counter to zero
Totaling (Accumulation)
(Continued)
10
The indicator will show "AddEd".
NOTE:
If a printer is installed, the print out will show the
Gross
,
Net
and
Tare
weights.
9
Press the "ON/PRINT" button to add load weight to the
total.
NOTE:
The subtotal can be viewed by pressing and
holding the "ON/PRINT" button for three seconds. The
counter (number of loads weighed) and subtotal will
flash for three seconds.
11
Repeat Steps 7-10 until all loads are weighed.
9
10
