Cascade Sciences CVAC-9.3, Руководство по установке и эксплуатации

Страница: 19 / 54

19 | P a g e
cascadesciences.com | Tel. 503 847-9047
INSTALLATION
H
ARDWIRE
R
EQUIREMENT
The oven requires permanent connect wiring (commonly known as hardwiring). Wiring to the power
source
must be performed by a qualified electrical technician. All other Installation steps may be
performed by the end user.
I
NSTALLATION
P
ROCEDURE
C
HECKLIST
For installing the unit in a new workspace location.
Pre-Installation

Check that the required ambient conditions for the unit are met, page 20.

Check that the spacing clearance requirements are met, page 20.
•
Unit dimensions can be found on page 9.

Check that a suitable permanent connect electrical power supply is present, page 21.
Install the Oven in a suitable workspace location

Review the lifting and handling instructions, page 22.

Make sure the oven is level, page 23.

Install the oven in its workspace location, page 23.
•
The oven may be connected to its power supply after this procedure.
Set up the Oven for use

Clean the oven chamber and shelving if needed, page 23.

Install the shelving in the oven chamber, page 24.

Connect the vacuum supply to the oven, page 25.