sories, or storing the router. Such preventive safety
measures reduce the risk of starting the router
accidentally.
1.19. Store out of the reach of children and do not
allow persons unfamiliar with the router or these
instructions to operate the router. The router is
dangerous in the hands of untrained users.
1.20. Use the router in accordance with these
instructions and in the manner intended for the
router, taking into account the working conditions
and the work to be performed.
1.21. Use of the router for operations different from
intended could result in a hazardous situation.
1.22. Have your router serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the router
is maintained.
2. SAFETY STICKERS AND EXPLANATIONS:
A Class II or double insulated electrical appliance
is one which has been designed in such a way that
it does not require a safety connection to electri-
cal earth. The basic requirement is that no single
failure can result in dangerous voltage becoming
exposed so that it might cause an electric shock
and that this is achieved without relying on an
earthed metal casing. This is usually achieved at
least in part by having two layers of insulating ma-
terial surrounding live parts or by using reinforced
insulation
Read instruction manual before operating or at-
tempting any maintenance work.
Read instruction manual before operating or at-
tempting any maintenance work.
Switch off and remove the plug from the mains
before cleaning or maintenance.
DO NOT leave or use this appliance in the rain.
Wear hearing and eye protection.
Keep Bystanders away.
3. COMPONENTS:
1 Depth guage
2 Depth indicator
3 Handle
4 Depth locking screw
5 Depth stop rod
6 Spindle lock
7 Spindle
8 Multi stop turret
9 Variable speed control
10 Safety switch
11 Parallel guides locking screw
12 Parallel guide rods
13 Parallel guide
14 Base plate
15 ON/OFF switch
16 Plunge lock
17 Dust extraction chute
18 Trammel
4. Use and care:
4.1 BEFORE USE
WARNING:
MAKE SURE THAT THE ROUTER IS
SWITCHED OFF AND UNPLUGGED FROM THE
MAINS SUPPLY BEFORE FITTING OR REMOV-
ING ANY ACCESSORIES.
4.1.1. INSTALLING AND CHANGING
ROUTER BITS
1. Rotate spindle whilst pushing the spindle lock
inwards until spindle is locked, (hold the spindle
lock on).
2. Using the wrench supplied, loosen the collet nut
a few turns and remove bit if fitted.
3. Insert new bit and tighten collet nut, release
spindle lock.
IMPORTANT:
At least two thirds of the bit shank
should be located inside the collet.
Содержание R1200EA
Страница 1: ...R1200EA ROUTER CAMINO ROUTEUR ROTEADOR...
Страница 2: ...18 1 9 10 10 11 12 15 16 17 13 14 2 3 4 5 6 7 8...
