13
CV072018-1
CLOCK MENU: CLOCK SETUP
This menu allows adjusting the day of the week and the current schedule for a correct management of the weekly schedule
ALARMS MENU: VISUALIZATION OF THE STATE OF ALARMS
If the control detects an anomaly, the latter is indicated in the main screen of the control with the intermittent display of a specific icon and
a red message at the top of the screen (Call service or Dirty Filters). If the alarm is detected when the screen is in standby mode, the screen
flashes intermittently (every 10 seconds approx.). Alarms in the pressure sensors are only available for machines with cav / cop kit.
Configuration of the day
Select the day / day line and press the OK button, the current day set will turn green; Scroll with the direction buttons to locate the desired day.
Press the OK button to confirm the selection, the day will change from green to blue.
Setting the time
Select the hours / hour line and press the OK button, the current time set will turn green; Scroll with the direction buttons to locate the desired
time. Press the OK button to confirm the selection, the time will change from green to blue.
Setting the minutes
Select the minutes line and press the OK button, Minutes will turn green; Scroll with the direction buttons to locate the desired minutes. Press
the OK button to confirm the selection, the word minutes will change from green to blue.
If the twinkle of an alarm is in progress, you can directly access the corresponding menu by touching the screen; otherwise, select Alarms on
the menu selection page and press OK. If the control is subjected to several units (master / slave mode), the unit to be monitored must be
selected (see Status menu); otherwise, the detail page of the alarms is accessed directly.
Alarm menu
twinkle of an alarm: outdoor air temperature probe
