Casall R400 II, Руководство пользователя

Страница: 9 / 19

- 5 -
Steps 3
Please remove the M8xP1.25x20L Screws (I-4) and Flat Washers (I-2) on the rear stabilizer (G).
Then fit the rear stabilizer (G) with slippery rail (H-12) by M8xP1.25x20L Screws (I-4) and Flat
Washers (I-2).
Remarks: Do not screw one set of the M8xP1.25x20L Screws and Flat washers too firm at one
time. It is better to fix the four sets firmly at the same time because it helps you to change angles
and to fix easily.
Steps 4
1.
Please remove the M5x35L screws (H-11) on the slippery rail (H-12)
2.
Pass the slippery rail (H-12) through the slide seat (H-4)
3.
Use the M5x35L screws (H-11) to fix the stopper (I-5) on the slippery rail (H-12) .