1. Unpack and inspect fan carefully to be certain all contents are
included.
1. Unpack and inspect fan carefully to be certain all contents are
included.
Blade holder
Fan Assembly
Downrod
Yoke Cover
Mounting
Bracket
Canopy
palm plastic blade
P2
Screw
2pcs
Wire nuts
6pcs
Remote Control
Transmitter / Receiver
Remote Control
Transmitter / Receiver
Blade Balance Kit
Blade Screw
Paper Washer
Mounting Screw
Spring Washer
Lock Washer
Wood Screw
Tooth Washer
Motor screw
Wire nuts
Hardware bag
Hardware bag
OFF OFF OFF
Turn off power at breaker
box to avoid possible
electrical shock.
Use metal outlet box suitable for
fan support.
Secure outlet box directly to the
building structure using wood
screws (included).
Outlet box must support 40 lbs min.
Install mounting bracket
to Outlet box in ceiling
using washers and the
mounting screws
provided with the outlet
box.
2.
3.
5.
Do not use existing
mounting bracket,
replace it with new
mounting bracket
from box.
Do not use existing
mounting bracket,
replace it with new
mounting bracket
from box.
Outlet Box
Mounting
Bracket
Bulbs*1
Glass
Light Kit
2pcs
2pcs
2pcs
2pcs
2pcs
3pcs
1pc
25pcs
25pcs
1pcs
Scroll
To ensure safely install the secondary support as follows
a. Using the wood screw and flat washer provided.
Pass through close loop of safety cable to wood screw.
b. Secure the wood screw to ceiling joist and make sure
the safety cable has tighten securely.
c. IMPORTANT
THE WOOD SCREW AND ITS SUPPORT
MUST BE ABLE TO FULLY SUPPORT THE WEIGHT
AT LEAST 100 LBS.
：
：
Safety cable
4.
Safety cable
