28
1) To go to PROGRAM mode, press the number 1 key then the MODE key.
6) If you wish to exit the PROGRAM mode press the C key.
4.6 Programming the Shop Data
The Shop data is two lines of text that prints on the bottom of the label unless it is suppressed
by the label mask. (page 38) You can use these two lines to print the name and address of the store
or anything else you want to print at the bottom of each label. Each line can contain 28 characters
or spaces.
: To clear data input
C
PRT/*
S
PRT/*
H
O
P
SHIFT
(Char Qty: 0~28)
1st line
2nd line
Ex) SHOP
shop
How to program the Head data
2) Press
key three times. The display shows “HEAd”.
3) Press the PRT/* key. The display shows “HEAd 01.01”. The numbers in the UNIT PRICE display
represent the line number and character number where your cursor is located. The number to the
left of the decimal is the line number you are on (01 or 02). The number to the right is the character
number position your cursor is located at or the position (01 to 28) the next character you enter will be.
4) Type in the NON-PLU commodity name (HEAD data) using the Alpha-numeric keypad.
If you make any mistakes press the C key. When you finish typing line 01 press the ENTER key
and you will go to line 02. If you want to skip line 01, press the
key, if you are on line 02 and
want to return to line 01 press the
key. Press the
key or
key to scroll left or right on a line
of text. As you type you will see the text scroll in the TOTAL PRICE display.
$
#
!
"
5) Press the PRT/* key when you are finished entering data. The display shows “HEAd”.
S
H
O
P
(Char Qty: 0~28)
