27
1) To go to PROGRAM mode, press the number 1 key then the MODE key.
2) Press
key two times. The display shows “MSG”.
3) Press PRT/* key. The display shows “MSGno 1000 0”.
4) Type the number of the MSG you wish to program or edit using the Numeric Keypad.
Remember the number can be from 1 to 1000. If you make any mistakes simply press the C key
and repeat step 4.
5) Press the PRT/* key. The display shows “Edit”. Press the PRT/* key again and the display shows
“EntEr MSG 01.01. Begin typing your MSG data using the Alpha-numeric keypad. Each message
can have 8 lines of text with 50 characters on each line. After you type each line press the ENTER
key. If you wish to skip a line press the
key If you want to go up a line, press the
key. Press the
key or
key to scroll left or right on a line of text. As you type, you will see the text scroll in the
TOTAL PRICE display..
$
#
!
"
6) When you are finished press the PRT/* key. The display shows “SAvE”. If you wish to save this
message, press the PRT/* key. If you do not want to save it press the
key until the display shows
“ESC” and then press the PRT/* key. If you want to edit a message, press the
key until you
see “Edit” in the display and press the PRT/* key.
$
$
7) If you want to program another MSG go back to step 2. If you wish to exit the PROGRAM mode
press the C key.
4.5 Programming the Head Data
The header or head data is two lines of commodity name that appears on the label when you
generate a NON-PLU item.
: To clear data input
C
PRT/*
H
PRT/*
E
A
D
H
E
A
D
SHIFT
(Char Qty: 0~28)
(Char Qty: 0~28)
1st line
2nd line
Ex) HEAD
head
