USB OPERATION
USB REQUIREMENTS
The following are minimum required specifications for using with the SI-300.2d USB port. If your
computer does not meet these requirements, you will experience lagging of audio and possible
freezing of your computer when attempting to operate the SI-300.2d.
WINDOWS
•
Microsoft Windows XP (32bit), Microsoft Windows Vista (32 or 64 bit), Microsoft Windows
7 (32 or 64 bit), Microsoft Windows 8 (32 or 64 bit), Microsoft Windows 8.1 (32 or 64 bit),
Microsoft Windows 10 (32 or 64 bit)
•
Available USB 2.0 Port (High speed for USB2.0)
•
ASIO/KS/WASAPI/Direct sound drivers for Windows XP to 10
MACINTOSH
•
NO driver is needed for MAC OS version 10.6.4 and above.
PC DRIVER INSTALLATON
To use the SI-300.2d USB port on a Windows based PC, you
MUST
install the provided driver which
is downloadable from The SI-300.2d product page on the Cary Audio website. We advise that users
read all instructions carefully before installing and following all instructions during the installation
process.
Installing the PC Driver:
(1)
Download the CARY XMOS USBAUDIO V3.34.0 (or later) USB Driver from the Cary Audio SI-
300.2d product page.
(2)
Unzip/extract the Driver folder and save to you desktop.
(3)
Connect a USB cable from the computer to the USB input of the SI-300.2d.
(4)
Power on the SI-300.2d. Wait until power button blue ring stops flashing, then select the USB
input.
(5)
Open the driver folder you saved to your desktop and double click the Setup.exe.
(6)
Follow the on-screen installation instructions.
(7)
Click “Finish” when complete.
MACINTOSH USB AUDIO SETUP
Start the setting on System Preferences Panel on MACINTOSH:
(1)
Power on the SI-300.2d and connect your USB cable from the unit to your MAC.
(2)
Open the System Preferences panel on your MAC.
(3)
Select ”SOUND” icon.
(4)
Select “OUTPUT.”
(5)
Select “
xCore USB Audio 2.0” Output
”.
(6)
Close the System Preferences Panel.
25