MENU OPERATION
b)
Enter Wi-Fi Key:
--------------------
If the chosen network is secured, enter the security key code of your Wi-Fi network
using the hand held remote
.
Use the number keys on the hand held remote as follows for all alphanumeric characters.
Note:
For spaces, press the “0” key for a blank space. For special characters, press the *._/ key.
c)
Assign IP: --- --- --- ---
Enter your desired IP address using the hand held remote control.
d)
Connect:
Yes
After successfully entering the network security key,
select
YES
to connect
.
3.
Scan Wi-Fi Networks:
Yes
Select
Yes
to display available Wi-Fi networks.
Choose the network you wish to connect
to and
select
it by pressing
Enter
on the hand held remote.
4.
Enter Wi-Fi Key: --------------------
If the chosen network is secured, enter the security key code of your Wi-Fi network using
the hand held remote
.
5.
Connect:
Yes
After successfully entering the network security key,
select
YES
to connect
.
6.
Status:
Connected
Connected
will display once successfully connected to your network. If the connection
was unsuccessful
No Connection
will be displayed. If this happens, make sure your Wi-
Fi is enabled on the SI-300.2d and your router/network is setup for
DHCP
. After
confirming, make sure the above selections are correct and jump to Reset Connection
below.
18
