Cary Audio Design Cinema 12, Руководство пользователя, Страница: 51 / 72

SETUP MENU
49
6. Use the and buttons on the remote to adjust the phase.
You can adjust each channel’s speaker to be “IN” phase or “OUT” of phase.
7. When you have finished setting the phase for all of the speakers within your
system, press the
button on the remote to select BACK, then press OK to
return to the previous “SETUP MENU” to continue through the system setup
process, or simply press the SETUP button to exit the “SETUP MENU”
completely.
INPUT
This menu is for matching the output of connected audio devices and the input jacks of
this Surround Sound Processor.
- Assigned Inputs
- Change input names
- Set Analog in config
- Set Analog in level
ASSIGNED INPUTS
Assign input sources to input Connectors. The following selected menus appear on the
Cinema 12 display:
Assigned Inputs
Input 1 XLR Digital
To assign inputs:
1. Press the SETUP button on the remote to enter the “SETUP MENU”.
The “SETUP MENU / LISTENING PROFILES” appears.
2. Press the button on the remote until you reach “INPUTS” on the front panel
display. The “SETUP MENU / INPUTS” menu appears on the front panel display.
3. Press the OK button on the remote to enter the “INPUTS” setup menu.
The “INPUTS / Assigned Inputs” menu appears on the front panel display.
4. Press the OK button on the remote to enter the “Assigned Inputs” setup menu.
The “Assigned Inputs / Input 1 XLR Digital” menu appears on the front panel
display.
5. Use the and buttons on the remote to select XLR Digital or XLR Analog.