MANUAL SOUND SETUP
43
5.
Press the OK button on the remote to enter the “SET BALANCE” menu.
The “SET BALANCE / TEST MODE.....Off” menu appears on the front panel
display.
6.
Press the
button on the remote to select between manual or auto test tones, or
to turn the test tones off completely.
By selecting MANUAL, a special test tone will be generated as you move through
each speaker, allowing you to measure the output of the speaker that's playing.
7.
Press the
button on the remote until you reach FL (FRONT LEFT) on the front
panel display.
The “Set Balance / FL……0.0dB” menu appears on the front panel display.
8.
Use the
and
buttons on the remote to adjust the speaker level.
You can adjust the selected channel level in 0.5dB steps across a range of -15dB
to + 15dB. The recommended calibration level is 75dB/SPL as displayed on the
meter.
9.
Press the
button on the remote when you have finished making the FRONT
LEFT level adjustment. Repeat steps 7 and 8 until you have completed setting the
appropriate level for each speaker within your system. Set all the levels to the
75dB reference level on your meter.
10.
When you have finished adjusting the levels for all of the speakers within your
system, press the
button on the remote to select BACK, then press OK to
return to the previous “SETUP MENU” to continue through the system setup
process, or simply press the SETUP button to exit the “SETUP MENU”
completely.
TO SET CHANNEL LEVELS USING THE AUTO TEST TONE FUNCTION
1.
Press the SETUP button to enter the SETUP MENU.
The “SETUP MENU / LISTENING PROFILES” menu appears on the front panel
display.
2.
Press the OK button on the remote to enter the “LISTENING PROFILES” menu.
The “LISTENING PROFILES / MEMORY 1” menu appears on the front panel
display.
3.
Press the OK button on the remote to enter the MOVIE MODE “Set Speaker
Config” settings menu.
The “MOVIE SPK Setting / Set Speaker Config” menu appears on the front panel
display.
Содержание Cinema 12
Страница 2: ......
Страница 29: ...CONTROLS AND DISPLAYS 27 ...